Airport runway lights explained


Airport Lights, what do they mean ?




Subscribe here to our Youtube Channel ... And you will have the advantage of asking questions specific to you and you get quick answers to your situations ....



The lights marking the ends of the runway emit red light toward the runway to indicate the end of runway to a departing aircraft and emit green outward from the runway end to indicate the threshold to landing aircraft. Taxiway edge lights are always blue. This is the best way to distinguish the surface from a runway. Taxiways at major airports may have centerline lights, which are always green, unlike the white centerline of a runway. What are the flashing lights at the airport? Flashing white and green for civilian land airports; Flashing white and yellow for a water airport; Flashing white, yellow, and green for a heliport; and. Two quick white flashes alternating with a green flash identifying a military airport.

Airport runway lights explained

What do blue lights mean at an airport?

Airport taxiway lights are always blue. These lights guide the flight crew and vehicle drivers in low visibility conditions, which includes nighttime operations. In the dark, humans best see the color blue green, which is why taxiway edge lights are blue and centerline lighting is green Keeping Your Wheels On The Pavement Runway edge lights are used to outline the edges of runways during periods of darkness or reduced visibility. These light systems are classified according to the intensity or brightness they are capable of producing: they are the High Intensity Runway Lights (HIRL), Medium Intensity Runway Lights (MIRL), and the Low Intensity Runway Lights (LIRL). The HIRL and MIRL systems have variable intensity controls, whereas the LIRLs normally have one intensity setting. The runway edge lights are white. On instrument runways, yellow replaces white on the last 2,000 feet or half the runway length, whichever is less, to form a caution zone for landings. The lights marking the ends of the runway emit red light toward the runway to indicate the end of runway to a departing aircraft and emit green outward from the runway end to indicate the threshold to landing aircraft. Runway Centerline Lights...

How Much Pavement Do You Have Left?

Runway centerline lights are spaced at 50-foot intervals on large precision runways to improve visibility. When viewed from the landing threshold, the runway centerline lights are white until the last 3,000 feet of the runway. The white lights begin to alternate with red for the next 2,000 feet, and for the last 1,000 feet of the runway, all centerline lights are red.

Approach Lights

Approach lights are the first lights that pilot will ‘reach’ during landing. They are of white color, unidirectional, blinking or steady type of lights. Approach lights are located prior to the runway. Their main function is to ‘show’ in what direction the runway is.

 

There are different type of runway approach. The simplest approach has a cross form and usually consists of 17 approach lights. This type approach lights is usually installed at regional and domestic airports.

 

The most advanced approach lighting system has a more complicated structure and includes lights of few colors – white, yellow, and red. You can see such system at huge air hubs like Dubai International Airport, Atlanta Airport, or Heathrow Airport.

 

Runway End Identification Light

Frequently named as Runway Threshold Identification Light (or RTIL), this is a white flashing light, unidirectional, that identifies beginning of a runway. Unlike approach lights, there only two RTIL lights installed per one side of a runway.

 

Runway Threshold Lights

 

Threshold Lights

Threshold lights are green color airfield lights, unidirectional type, installed at the beginning of the part of a runway where aircraft can do touchdown. Threshold is not a touchdown point yet. But this is a beginning of ‘safe-to-land’ part of a runway.

 

Runway Edge Light

Runway edge lights are the most important lights on the airfield. They are located on the left and right sides of a runway (edges) and illuminate the part of the runway safe for landings.

 

Solar Runway Lights

Runway Edge Lights

 

Runway edge lights are of different colors, usually they are bidirectional. The most often used are white/white lights. Also, white/yellow, white/red, and yellow/red runway edge lights can be installed on the runway. Such differentiation of colors of runway edge lights is explained by the category of a runway, it’s length, and other factors. In simple words, more complicated is airfield – more colors you will see on the runway. The same story as with approach lights.

 

Runway End Light

Runway end light identifies the end of a runway. It means that behind these lights, there is no place to continue aircraft movement. Runway end lights are unidirectional red color aviation lights.

 

Green red threshold end lights

Runway Threshold End Lights

 

Very often, airports use as kind of ‘combined’ solution: runway threshold end lights. This is a bidirectional green/red airfield light. From one direction it is green, from the other direction it is red. Threshold end lights are installed on the runways having threshold and runway end in the same location. It saves money. Because, in fact, airport will install twice less quantity of lighting fixtures comparing to acquiring set of unidirectional green threshold lights, and set of unidirectional red runway end lights.

 

Taxiway Lights

Taxiway lights are blue color airfield lights installed on taxiways, and aprons. Taxiway is a part of airfield where aircraft is moving after landing to a runway. Taxiway lights are not so bright comparing to runway edge or threshold lights. And, they are almost invisible from the air. Actually, it’s not necessary. Because the pilot uses them only while moving on airfield.

 

PAPI stands for Precision Approach Path Indicator. This is a bicolor light that helps a pilot to keep the correct path when approaching airport runway. PAPI lights are located on the left and right side of the runway, a little bit far from threshold lights.

 

Each PAPI light usually consists of four lighting fixtures (4 x Light House Assemblies).  Each lighting unit can provide red or white light output. If aircraft is too low to the ground, all four lights will be of red color. If aircraft is too high, all 4 lights will be of white color. So, the correct path is when two lights are white and two lights are red.


More Aviation subjets on https://www.chkod.com/
This is an Aerospace engineering concerned with the development of aircraft and spacecraft, focused on designing aeroplane and space shutlle and it is a study of all the flying wing used within the earth's atmosphere. Also dealing with the Avionic systems that includes communications, navigation, the display and management of multiple systems. Also dealing with Aircraft mishap such as Accident and Serious Incident. #aviation_jobs #aviation_courses #aviation_topic #aviation_study #aviation_basic #aerospace_engineering #avionic_systems #aerospace_navigation #aircraft_mishap #aviation_accident #aviation_invetigation
This is an Aerospace engineering concerned with the development of aircraft and spacecraft, focused on designing aeroplane and space shutlle and it is a study of all the flying wing used within the earth's atmosphere. Also dealing with the Avionic systems that includes communications, navigation, the display and management of multiple systems. Also dealing with Aircraft mishap such as Accident and Serious Incident